Status Before Skankaway

This last weekend was a very busy work weekend. We had everyone on deck except one to get the two cars ready for the thrashing that is coming this weekend at Sears Point. Here are some pictures of the working crew.

There where 5 under the car before I could get a camera

The list of action items has been dwindle, but there are some nagging problems left.

Z issues:

Make the Wheels fit After 7 races we might have bent a few front suspension parts.When mounting the new rims we found that the passenger side wheel rubs the strut while the Driver's side clears the suspension parts.To fix this a wheel spacer is needed to accommodate the new wheel.Here are the task to get that done: · Replace Studs on the front hubs · Connect Hubs and Rotors · Remount the hubs · Install brakes · Bleed Brakes · Install Wheel Spacer · Roll front fenders Paint Several locations on the car can use a little rattle can work giving the car that radiant glow. Mark the tow hitch Need I say more Added team logo Print label and install Check Fluid Levels Radiator, oil and brake fluid should be checked before car leaves the shop. Items for the D Dashboard Mounting Need cable from Sparky to connect the ECU to the dash Volt meter installation Awaiting the part from Sparky Radiator Screen Added poultry wire in front of radiator Alignment All four wheel needs alignment Finish fiberglassing rear fin Complete the asymmetric rear wing. Finish fiberglassing fender Complete running and sanding the fenders. Pain Paint is need to cover the new fiberglass. Added team logo Print label and install Added Car Number 196 Mark the tow hitch Need I say more Check Fluid Levels Radiator, oil and brake fluid should be checked before car leaves the shop.