It was a busy three days of racing, so sorry for getting this out late.
Reviewing the two cars performance, we did really well with only minimal damage. After the two days of racing we achieved the primary goal. Both cars finished each day still racing. When compared to the other 150+ teams we scored Z came in 27 position and the D 43.
So, thank you everyone for a great weekend!
Muddy
Showing posts with label Sears Pointless 2017. Show all posts
Showing posts with label Sears Pointless 2017. Show all posts
Wednesday, March 29, 2017
Friday, March 24, 2017
Driving Schedule For Sears Pointless
Here is the Drivers Schedule for this weekend if all goes well. Weather is the early contender to throw this off.
| Day 1 | |||||||||||
| Practice | |||||||||||
D
|
Z
| ||||||||||
| Start | Finish | Pilot | Notes | Start | Finish | Pilot | Notes | ||||
| 10:00 AM | 10:39 AM | Driver | 1 | Estimated 8 laps | 10:00 AM | 10:37 AM | Driver | 1 | Estimated 9 laps | ||
| 10:51 AM | 11:16 AM | Driver | 2 | Estimated 8 laps | 10:51 AM | 11:16 AM | Driver | 2 | Estimated 9 laps | ||
| 11:28 AM | 11:53 AM | Driver | 3 | Estimated 8 laps | 11:30 AM | 11:55 AM | Driver | 3 | Estimated 9 laps | ||
| 11:53 AM | Plan for BS Inspection | 11:55 AM | Plan for BS Inspection | ||||||||
| 1:00 PM | 1:00 PM | ||||||||||
| 1:00 PM | 1:25 PM | Driver | 4 | Estimated 8 laps | 1:00 PM | 1:25 PM | Driver | 4 | Estimated 9 laps | ||
| 1:37 PM | 2:02 PM | Driver | 5 | Estimated 8 laps | 1:39 PM | 2:04 PM | Driver | 5 | Estimated 9 laps | ||
| 2:14 PM | 2:39 PM | Driver | 6 | Estimated 8 laps | 2:18 PM | 2:43 PM | Driver | 6 | Estimated 9 laps | ||
| Day 2 | |||||||||||
| Race Session I | |||||||||||
D
|
Z
| ||||||||||
| Start | Finish | Pilot | Notes | Start | Finish | Pilot | Notes | ||||
| 10:00 AM | 11:00 AM | Driver | 1 | Estimated 22 laps | 10:00 AM | 11:36 AM | Driver | 1 | Estimated 46 laps | ||
| 11:12 AM | 12:30 PM | Driver | 2 | Estimated 32 laps | 11:48 AM | 1:24 PM | Driver | 2 | Estimated 46 laps | ||
| 12:42 PM | 2:00 PM | Driver | 3 | Estimated 32 laps | 1:36 PM | 3:12 PM | Driver | 3 | Estimated 46 laps | ||
| 2:12 PM | 3:30 PM | Driver | 4 | Estimated 32 laps | 3:24 PM | 5:00 PM | Driver | 4 | Estimated 46 laps | ||
| 3:42 PM | 5:00 PM | Driver | 5 | Estimated 32 laps | |||||||
| Day 3 | |||||||||||
| Race Session II | |||||||||||
D
|
Z
| ||||||||||
| Start | Finish | Pilot | Notes | Start | Finish | Pilot | Notes | ||||
| 9:00 AM | 10:00 AM | Driver | 1 | Estimated 22 laps | 9:00 AM | 10:21 AM | Driver | 1 | Estimated 38 laps | ||
| 10:12 AM | 11:18 AM | Driver | 2 | Estimated 27 laps | 10:33 AM | 11:54 AM | Driver | 2 | Estimated 38 laps | ||
| 11:30 AM | 12:36 PM | Driver | 3 | Estimated 27 laps | 12:06 PM | 1:27 PM | Driver | 3 | Estimated 38 laps | ||
| 12:48 PM | 1:54 PM | Driver | 4 | Estimated 27 laps | 1:39 PM | 3:00 PM | Driver | 4 | Estimated 38 laps | ||
| 2:06 PM | 3:12 PM | Driver | 5 | Estimated 27 laps | 3:12 PM | 4:33 PM | Driver | 5 | Estimated 38 laps | ||
| 3:24 PM | 4:30 PM | Driver | 5 | Estimated 27 laps | |||||||
Packed and Ready to Hit the Road
We are all packed and settling down for the evening. We plan on getting to the track early to get a preferred spot. Practice and Tech Inspection open at 10:00am. Guess what line the cars will be in. Yep, hoping for track.
As for the status we believed we were track ready when we loaded the cars. However, while loading the Z the brakes felt soft. We have new pads, so we will drive through the paddock early and bed the brakes in and hope it is just that. However, a soft brake pedal is usually hydraulic issue, so we will see when the Z come off the trailer.
For the D it appears ready. With the amount of work and changes, it might take us sometime sort it out, so let the fun begin.
As for the status we believed we were track ready when we loaded the cars. However, while loading the Z the brakes felt soft. We have new pads, so we will drive through the paddock early and bed the brakes in and hope it is just that. However, a soft brake pedal is usually hydraulic issue, so we will see when the Z come off the trailer.
For the D it appears ready. With the amount of work and changes, it might take us sometime sort it out, so let the fun begin.
Tuesday, March 21, 2017
Live Video Feed From the Z During Sears Pointless
For this Pointless race we again will run the Racecast video from the car. We will run the system on Friday (10:00-12:00 and 1:00-3:00) in practice then again on Saturday (10:00-5:00) and Sunday (9:00-4:30) for the race.
Here is the link:
https://live.racecast.me/event/585d9526331731840179bb4c
Racecast
Here is the link:
https://live.racecast.me/event/585d9526331731840179bb4c
Racecast
Half-Life Racing Plead For Residual Value in time for Sears Pointless 2017
Judge Phil,
This was a substantial hit for Ra-D-ium and we felt lucky everyone walked away.
After a review of the damage we got to work; cutting, pounding, prying, welding, and 2 hours, we were able to get the D back on course and running laps.
On day both cars were running well until the differential in the D failed and we were Tow bait again:
The D was sent out for the last 1:30 hours of the race
Half-Life Racing runs two cars named Sieze-Z-um and Ra-D-ium. These two chariot's have several races, so they are getting well worn. After a lot of wrenching we were able to cobble both cars together for the Ares-Freeze race.
Alas, all well and we even got in a few laps before:
This was a substantial hit for Ra-D-ium and we felt lucky everyone walked away.
After a review of the damage we got to work; cutting, pounding, prying, welding, and 2 hours, we were able to get the D back on course and running laps.
On day both cars were running well until the differential in the D failed and we were Tow bait again:
After an hour to replace the Differential.
The D was sent out for the last 1:30 hours of the race
In the end we where able to get both cars to the checker. These the cars finished both days seeing the checker.
Following the race we inspected both cars and identified a lot of work that was needed. For Ra-D-ium the front left is fairly bent up. What was obvious was the 1" elevation of the right to the left frame rail. With even more intense pulling and prying we were able to get the suspension's pickup points straight-ish. Now for cost, the upper control arm was fairly well destroyed. So we, would like to replace the upper control arm and plead for $47 to allow it's replacement.
For the Z it appears that we almost had front left wheel failure. Upon review, we sheared off the spindle and melted the bearing to spindle. The wheel freely wobbled and was only held on by a metal flange. To prevent this we would like to replace the Spindle hub for $34.
In total Half-Life Racing is looking for $45 for Ra-D-ium and $34 for Seize-Z-ium.
Thank yo for the review
Muddy
Hotel Reservation for Sears Pointless 2017
| |||||||||||||||||
|
Friday, March 17, 2017
Final Weekend Work Checklist for Sears Pointless
A lot of hard work has gone in to getting the cars and Daws close for the upcoming stress test. With a week to go we are close.
One item that has been bedeviling (me specifically) is the balance of the D. The events of the past four races have simply destroyed the D. In a previous blog I went into detail of what mess we have and how we worked to "fixed it". Under static look it appears fine, however, on simulated driver load (which is 2 x 350Z rotors, a lose car battery, a tote of brake parts, 6 x five quarts jugs of oil, a gallon of water, and spare alternate = 190 lbs ) the corner weighs go to hell. The left rear out weights the front right and the left front is 2/3 the weight of the entire left side.
So, after days of fiddling, by adjusting ride heights with various blocks under wheel while the car is on the scales (Thank you Torch for the ideal), I have developed a "theoretically" fix. Now this weekend I need to apply these "fixes" and set the final height. How can this go wrong?
In addition to the balance here is the rest of the items that need to be completed:
One item that has been bedeviling (me specifically) is the balance of the D. The events of the past four races have simply destroyed the D. In a previous blog I went into detail of what mess we have and how we worked to "fixed it". Under static look it appears fine, however, on simulated driver load (which is 2 x 350Z rotors, a lose car battery, a tote of brake parts, 6 x five quarts jugs of oil, a gallon of water, and spare alternate = 190 lbs ) the corner weighs go to hell. The left rear out weights the front right and the left front is 2/3 the weight of the entire left side.
So, after days of fiddling, by adjusting ride heights with various blocks under wheel while the car is on the scales (Thank you Torch for the ideal), I have developed a "theoretically" fix. Now this weekend I need to apply these "fixes" and set the final height. How can this go wrong?
In addition to the balance here is the rest of the items that need to be completed:
Work
Checklist for Sears Pointless 2017
| ||||||
Electrical
Systems
|
Status
| |||||
Items
|
300z
|
Type D
|
Comments
| |||
1
|
Power
disconnect switch
|
Done
|
Done
|
Test
| ||
2
|
Dashboard
/ Gages
|
Done
|
Done
| |||
3
|
Alternator
light
|
Done
|
Done
| |||
4
|
Descuzzify
wires
|
Done
|
Done
| |||
5
|
Main
power battery hookups
|
Done
|
Done
| |||
6
|
Traqmate
|
Check
D
| ||||
7
|
Battery
charged
|
Done
|
Done
| |||
8
|
Check
charging system
|
Done
|
Done
| |||
9
|
Check
ECU error codes
|
Done
|
Done
| |||
10
|
Switch for the
cooling seat
|
Done
|
Done
|
Not
Needed
| ||
11
|
Start button
|
Done
|
Done
| |||
12
|
Cooling
fan
|
D and Z-
Mount thermocouple
| ||||
13
|
Idiot light system
|
Done
|
Done
| |||
14
|
Racer Connect
System - Car
|
Camera
Setup
| ||||
15
|
Racer Connect
System - Pit
|
Jackspot
setup – Laptop - Monitor
| ||||
Engine
and Drivetrain
| ||||||
Items
|
300z
|
Type D
|
Comments
| |||
1
|
Engine
compress test
|
Done
|
Done
|
Z- 1-170, 2-170, 3-170-, 4-170, 5-170, 6-160
D1-175,
2-180, 3-180, 4-180
| ||
2
|
Spark plug
|
Done
|
Done
| |||
3
|
Replace
oil filter
|
Done
|
Done
|
D -
Install new filter housing
| ||
4
|
Replace
engine oil
|
Done
|
Done
|
Need 18 quarts for
the race
| ||
5
|
Check transmission
oil
|
Done
|
Done
| |||
6
|
Check differential
oil
|
Done
|
Done
| |||
7
|
Check clutch fluid
| |||||
8
|
Inspect timing
belt
|
Done
|
Done
| |||
9
|
Inspect
water and alt belt
| |||||
10
|
Check
air box
|
Done
|
Done
| |||
11
|
Check
and add water to radiator
| |||||
12
|
Check
and add water to overflow
| |||||
13
|
Inspect
throttle cable
| |||||
14
|
Oil cooler and lines inspection
|
Done
|
D-
Need Replacement
| |||
15
|
Run engine to temperature
|
Done
|
Done
| |||
16
|
Radiator
|
Done
|
Done
| |||
17
|
Radiator screen
|
Done
|
Done
| |||
Suspension
and Brakes
|
||||||
Items
|
300z
|
Type D
|
Comments
|
|||
1
|
Check
strut and tighten
|
|||||
2
|
Inspection
ball joint
|
|||||
3
|
Check
wheel bearings
|
|||||
4
|
Front and
rear sway bar mount
|
Done
|
||||
5
|
Check
rear and front bushing
|
|||||
6
|
Check
rotors
|
Done
|
Done
|
|||
7
|
Check
brake pads
|
Done
|
Done
|
|||
8
|
Bleed
brake lines
|
|||||
9
|
Alignment
|
|||||
10
|
Tires
and rims
|
Have
tire need to mount
|
||||
11
|
Check
tire pressures
|
Z – 29
f 28 r D – 28 f/r
|
||||
12
|
Strut tower
support
|
|||||
13
|
Springs
and Perch Inspection
|
|||||
14
|
Brake
Bias
|
Done
|
Done
|
D –
Acquire and add
|
||
15
|
Brake
Cooling
|
Done
|
||||
Safety
Systems
|
||||||
Items
|
300z
|
Type D
|
Comments
|
|||
1
|
Check
fire extinguisher
|
Done
|
Done
|
|||
2
|
Fire suppression
system
|
Done
|
||||
3
|
Check seat
|
Done
|
Done
|
|||
4
|
Check
back rest
|
Done
|
Done
|
|||
5
|
Check
seat harness
|
Done
|
Done
|
|||
6
|
Check
mirrors
|
Done
|
Done
|
|||
7
|
Roll
bar pad
|
Done
|
Done
|
|||
8
|
Check
tow hitch
|
Make
sure they are labeled
|
||||
9
|
Cover
remaining glass
|
Done
|
Done
|
|||
10
|
Secure
roll cage
|
Done
|
Done
|
|||
11
|
Arm
restraints / driver net
|
Done
|
Done
|
|||
12
|
Fire
wall inspection
|
|||||
13
|
Battery
disconnect outside
|
Done
|
Done
|
|||
14
|
Main
battery secured
|
Done
|
Done
|
|||
15
|
Rear
fire wall
|
|||||
16
|
Windshield
|
Done
|
Done
|
|||
17
|
Fuel
system and vent line
|
Done
|
Done
|
|||
Chassis
|
||||||
Items
|
300z
|
Type D
|
Comments
|
|||
1
|
Wipers
|
|||||
2
|
Front
skirt
|
|||||
3
|
Rear
diffuser
|
Done
|
||||
4
|
Rear
spoiler
|
Done
|
||||
Subscribe to:
Posts (Atom)








